EMC Connectrix ED-64M, User Manual

Page: 374 / 476

E
E-40
Connectrix ED-64M User Guide
Command Line Interface
Parameters This command has five parameters. Up to six community names and
trap recipients may be defined.
Command Example
Root> config snmp addCommunity 1 "CommunityName1" enabled
123.123.123.123. 162
config.snmp.authTraps
Syntax
authTraps enabledState
Purpose This command enables or disables the authorization traps to be sent
to SNMP management stations when unauthorized stations try to
access SNMP information from the director.
commIndex
Specifies the community to be created or
edited. Valid values are integers 1 through
6
.
commName
Specifies the community name of the
community specified by commIndex. The
community name must not exceed 32
characters in length. Valid characters
include all those in the ISO Latin-1
character set. Duplicate community
names are allowed, but the corresponding
writeAuthorization values must match.
writeAuthorization
Specifies the write authorization state of
the community. Valid values are enabled
and disabled. Boolean 1 or 0 may be
substituted as values.
trapRecipient
Specifies the trap recipient. Values must
be 4 bytes in dotted-decimal format.
udpPortNum
Specifies the UDP port number to which
the director sends traps for each recipient.
The values must be a decimal number; the
default value is 162. Valid values include
all legal UDP port numbers.