EMC Connectrix ED-64M, User Manual

Page: 240 / 476

A
A-24
Connectrix ED-64M User Guide
Using SNMP to Manage the Switch
The TCP Connection
Table
The TCP connection table contains information about this entity's
existing TCP connections.
Table A-12
TCP Connection Table
MIB-2 Object Name Type Access Description
tcpConnState INTEGER R/W The state of this TCP connection. The only value which may be set by a
management station is deleteTCB(12). Accordingly, it is appropriate for an
agent to return a `badValue' response if a management station attempts to set
this object to any other value. If a management station sets this object to the
value deleteTCB(12), then this has the effect of deleting the TCB (as defined in
RFC 793) of the corresponding connection on the managed node, resulting in
immediate termination of the connection. As an implementation-specific option,
a RST segment may be sent from the managed node to the other TCP
endpoint (note however that RST segments are not sent reliably).
Values:
closed(1),
listen(2),
synSent(3),
synReceived(4),
established(5),
finWait1(6),
finWait2(7),
closeWait(8),
lastAck(9),
closing(10),
timeWait(11),
deleteTCB(12)
tcpConnLocalAddress IpAddress R The local IP address for this TCP connection. In the case of a connection in the
listen state which is willing to accept connections for any IP interface
associated with the node, the value 0.0.0.0 is used.
tcpConnLocalPort INTEGER
(0..65535 R The local port number for this TCP connection
tcpConnRemAddress IpAddress R The remote IP address for this TCP connection
tcpConnRemPort INTEGER
(0..65535) R The remote port number for this TCP connection