EMC Connectrix ED-64M, User Manual

Page: 250 / 476

A
A-34
Connectrix ED-64M User Guide
Using SNMP to Manage the Switch
FxPort Configuration
Table A table that contains, one entry for each FxPort in the Fabric Element,
configuration and service parameters of the FxPorts.
Table A-20 FxPort Configuration Table
Fabric Element MIB Object
Name
Type
Provided
By
Access Description
fcFxConfFxPortIndex FcFeFxPortIndex SNMP R This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated
module. The value remains constant for the
identified FxPort until the module is re-initialized.
This number ranges from 1 to
AS_glob.prod_cnfg_ptr->ports_per_module.
FcFxPortName FcPortName PCP R The name identifier of this FxPort. Each FxPort
has a unique port name within the address space
of the Fabric.
This is the WWN assigned to the port.
FcFxPortFcphVersionHigh FcphVersion FC2 R The highest or most recent version of FC-PH that
the FxPort is configured to support. Since the
switch is not capable of changing its support for
FC-PH version, the version reported is the one
currently in use for this port. If there is no device
logged in, then the value is 0.
If a device is logged in, the values reported are:
6 = FC-PH 4.0
7 = FC-PH 4.1
8 = FC-PH 4.2
9 = FC-PH 4.3
0x10 = FC-PH2
0x20 = FC-PH3
FcFxPortFcphVersionLow FcphVersion FC2 R The lowest or earliest version of FC-PH that the
FxPort is configured to support. Since the switch is
not capable of changing its support for FC-PH
version, the version reported is the one currently
in use for this port. If there is no device logged in,
then the value is 0. For values Refer to
FcFxPortFcphVersionHigh.
FcFxPortBbCredit FcBbCredit PCP R The total number of receive buffers available for
holding Class 1 connect-request, Class 2 or 3
frames from the attached NxPort. It is for
buffer-to-buffer flow control in the direction from
the attached NxPort (if applicable) to Fport.