EMC Connectrix ED-64M, User Manual

Page: 255 / 476

A
Fabric Element MIB Support
A-39
Using SNMP to Manage the Switch
FcFxPortPhysOperStatus INTEGER FPM,
SNMP R The current operational status of the FxPort. The
testing(3) indicates that no operational frames can be
passed. If fcFxPortPhysAdminStatus is offline(2) then
fcFxPortPhysOperStatus should be offline(2). If
fcFxPortPhysAdminStatus is changed to online(1) then
fcFxPortPhysOperStatus should change to online(1) if
the FxPort is ready to accept Fabric Login request from
the attached NxPort; it should proceed and remain in the
link-failure(4) state if and only if there is a fault that
prevents it from going to the online(1) state. The values
are defined as follow: online(1) – Login may proceed,
offline(2) – Login cannot proceed, testing(3) – port is
under test, link-failure(4) – failure after online/testing.
Refer to Port State Descriptions on page A-100.
FcFxPortPhysLastChange TimeTicks SNMP R The value of sysUpTime at the time the FxPort entered
its current operational status. A value of zero indicates
that the FxPort’s operational status has not changed
since the agent last restarted.
This is SS_TIM_RD_TICKS(MILLISEC) * 10.
FcFxPortPhysRttov MilliSeconds SNMP R The Receiver_Transmitter_Timeout value of the FxPort.
This is used by the receiver logic to detect Loss of
Synchronization.
This value is fixed at 100ms.
Table A-22
FxPort Physical Level Table (continued)
Fabric Element MIB
Object Name
Type
Provided
By
Access Description