EMC Connectrix ED-64M, User Manual

Page: 288 / 476

A
A-72
Connectrix ED-64M User Guide
Using SNMP to Manage the Switch
Table A-35
Link Table
FA MIB Object Name Type Product Mapping Access Description
*fcConnUnitLinkIndex Unsigned32 A link index. R This value is used to create a
unique value for each entry in the
link table with the same
fcConnUnitId. The value can only
be reused if it is not currently in use
and the value is the next candidate
to be used. This value is allowed to
wrap at the highest value
represented by the number of bits.
This value is reset to zero when the
system is reset and the first value to
be used is 1.
FcConnUnitLinkNodeIdX OCTET STRING
(SIZE(16)) The WWN of the
local fcConnUnit is
returned. This
information is
available for both E
and F ports R The node WWN of the unit at one
end of the link. If the node WWN is
unknown and the node is a
fcConnUnit in the responding agent
then the value of this object MUST
BE equal to its fcConnUnitId.
FcConnUnitLinkPortNumberX Integer32 The fcConnUnit’s
local port number is
returned. This
information is
available for both E
and F ports. R The port number on the unit
specified by
fcConnUnitLinkNodeIdX if known,
otherwise –1. If the value is
non-negative then it will be equal to
fcConnUnitPortPhysicalNumber.
FcConnUnitLinkPortWwnX OCTET STRING The local side port
WWN on the link.
This information is
available for both E
and F ports. R The port WWN of the unit specified
by fcConnUnitLinkNodeIdX if
known, otherwise 16 octets of
binary 0.
FcConnUnitLinkNodeIdY OCTET STRING
(SIZE(16)) The attached node
WWN on the link.
This information is
available for E ports
and F ports. E port
nodeIdY can be
retrieved from
RNID, F port
NodeIdY is
supported by
FLOGI. R The node WWN of the unit at the
other end of the link. If the node
WWN is unknown and the node is a
fcConnUnit in the responding
SNMP agent then the value of this
object must be equal to its
fcConnUnitId.