EMC Connectrix ED-64M, User Manual

Page: 173 / 476

5
Configuring Threshold Alerts
5-45
Configuring the Director
Creating New Alerts Follow these steps to create a new threshold alert:
1. Click Configure on the Product Manager menu bar and select
Threshold Alerts on the drop-down menu.
This displays the Configure Threshold Alerts window (Figure
5-22).
Figure 5-22
Configure Threshold Alerts Window
If alerts are configured, they appear in table format (as shown in
Figure 5-27 on page 5-50), showing the name of the alert, type of
alert (Rx, Tx, or Rx or Tx), and alert state (Active or Inactive).
2. Click New.
This displays the New Threshold Alert window (Figure 5-23).