EMC Connectrix ED-64M, User Manual

Page: 356 / 476

E
E-22
Connectrix ED-64M User Guide
Command Line Interface
Parameters This command has two required parameters:
Command Examples
Root> config port blocked 4 false
Root> config port blocked 4 0
config.port.extDist
Syntax
extDist portNumber extDistOn
Purpose This command sets the extended distance state for a port.
Description When the extended distance field is true, the port is configured for 60
buffer credits, which supports a distance of up to 100 km for a 2 Gb/s
port.
Parameters This command has two required parameters:
Command Examples
Root> config port extDist 4 false
Root> config port extDist 4 0
config.port.name
Syntax
name portNumber “portName”
Purpose This command sets the name for a port.
portNumber
Specifies the port number. Valid values for the
ED-64M are 0 through 63.
blockedState
Specifies the blocked state for the port. Valid
values are true and false. Boolean 1 or 0 may be
substituted as values.
portNumber
Specifies the port number. Valid values for the
ED-64M are 0 through 63.
extDistOn
Specifies the extended distance state for the
port. Valid values are true and false. Boolean 1
or 0 may be substituted as values.