EMC Connectrix ED-64M, User Manual

Page: 215 / 476

7
Resetting the Configuration
7-19
Using Maintenance Features
3. To continue the reset operation, click Reset on the Reset
Configuration dialog box. If you want to cancel the operation,
click Cancel.
Since the IP address is reset, you may not recover the Ethernet connection to
the director if you have changed the director‘s IP addressing from the default
value. In this case you must re-enter the LAN parameters using the operator
panel if you want to continue using the Product Manager.
Table 7-1 lists the default configuration settings:
Table 7-1
Data Default Values
Configuration Description Default
Identification Director Name NULL string
Director Description “Fibre Channel director”
Director Contact “End User Contact (please configure)”
Director Location “End User Contact (please configure)”
Ports Port Names NULL strings
Port Blocked States Unblocked
Extended Distance
(10–100 km) Disabled
LIN Alerts Disabled
Port Address Port number plus 4
Director Addressing IP Address 10, mac[3], mac[4], mac[5] converted to
word32. MAC addresses are set in
hexidecimal; IP addresses in decimal. A
MAC address of 08 00 88 20 00 57 wil be
reset to an IP address of 10.32.0.87.
Subnet Mask 255.0.0.0
Gateway Address 0.0.0.0
MAC Address PROM value