EMC Connectrix ED-64M, User Manual

Page: 351 / 476

E
The config Branch
E-17
Command Line Interface
config.features.installKey
Syntax
installKey featureKey
Purpose This command allows the user to install a feature set that is enabled
by the provided feature key.
If any currently installed feature is being removed by the new feature key, the
director must be off line when the command is issued.
Parameters This command has one parameter:
Command Example
Root> config features installKey AaBb-CCdD-eeFF-gH
config.features.enterpriseFabMode
The functionality of this command is identical to
config.enterpriseFabMode.setState on page E-16.
Syntax
enterpriseFabMode enterpriseFabModeState
Purpose This command sets the Enterprise Fabric Mode state for the fabric.
The EMC Enterprise Fabric Extensions feature key must be installed
to activate the Enterprise Fabric Mode state.
Parameters This command has one parameter:
featureKey
Specifies the key you have received to enable
optional software feature on a specific product.
A feature key is a string of case-sensitive,
alphanumeric ASCII characters.
The number of characters may vary in the
format; however, the key must be entered
exactly, including the hyphens. An example of a
feature key format is XxXx-XXxX-xxXX-xX.
enterpriseFabModeState
Specifies whether entrepriseFabMode
is active. Valid values are activate and
deactivate
. Boolean 1 and 0 may be
substituted as values.