Eaton RF System 2.42, Manual

Page: 29 / 244

29 Eaton RF-System
© 2015 Eaton Electrical Group
Commands of the Actions Menu
The Actions menu includes the following commands:
Scan All components are scanned via RF
Scan reception quality Scans the reception quality of all devices in the project
(Professional version only)
Recalculate all connections Recalculates the connections (best routing paths) of all
devices
Recalculate Resenders of old
Status connections Recalculates the Resenders of old Status connections
Load Modified configurations are loaded into the devices via
RF
Reset all devices… Resets all components to their delivery state
Load all devices… Reloads all devices with a full set of data
Display Traffic Opens the on-line monitor of RF telegrams
Define Project-Topology... Possibility to create or edit diverse areas in the project
Create manual Routing Creates a connection by manual drawing the routing
path
Replace device You can replace defective devices with new ones
Transfer virtual device
funtions... Transfers the function of selected virtual devices to
real devices
Scan
The reception area is scanned for Eaton RF products only when connected to the Gateway
(RS232 Interface)
All scanned devices are displayed on the screen. If the devices are already configured all
connections, configuration and also the desktop position are also scanned.
Advice: For a complete reflection of the project and all devices regarding the reception quality
scan first all main supplied devices and after that all battery supplied devices. So it is assured that
the
calculations of connections and routing paths is always the best way.
When using Professional version you can scan the reception quality and the normal device data
separately from each other.
After executing the function Scan the Options window for the project settings will appear, in which
specific import options for the upcoming scan process can be defined.
After selecting the desired options and clicking on Scan the process is initiated.