Eaton RF System 2.42, Manual

Page: 165 / 244

165 Eaton RF-System
© 2015 Eaton Electrical Group
In this configuration the Multi-Heating actuator works in the operation type Heating only therefor we
recommend plugging the jumpers on the Multi-Heating actuator for each channel to „Heating only“.
That will make sure that these channels will never be controlled when operation type cooling is
active.
Operation with Room-Manager:
In this case every connected channel of the Multi-Heating actuator receives Set- and actual
temperature from a Room of the Room-Manager. Each Room can be connected to multiple inputs
of the Multi-Heating actuator but each input can only have one connection.
If an input of the Multi-Heating actuator is used for „Heating only“, „Cooling only“ or „Heating and
Cooling“ can be defined when drawing the connection.
Before connecting Rooms with inputs of the Multi-Heating actuator you have to make sure that the
Room-Manager and Multi-Heating actuator always are in the same operation type. This is done by
connecting the „Operation type output“ of the Room-Manager with the „Heating/Cooling“ input of
the Multi-Heating actuator. .
The Set values and the timer programs for each room can later be configured in the
Room-Manager configuration window.