207
Eaton RF-System
© 2015 Eaton Electrical Group
After a
command, the actuator will now dim to the value of 80%.
Configuration Example of the Shutter Actuator
For basic configuration, e.g. selecting the functions, please refer to
Configuration Example of the Switching Actuator
A shutter actuator has no selection options for operating status after power recovery nor for
Blinking in case of a low sensor battery. The only time-related settings that can be carried out are
for the control time (with a long push at the key or push-button) and the runtime (for functions such
as open, close, etc.)
1. The runtime can be changed by moving the slider control to 10 seconds (min. 1 second to max.
1h, standard 1 minute).
Summary of Contents for RF System 2.42
