Eaton RF System 2.42 Manual Download Page 95

Page: 95 / 244

Eaton RF-System

Operation-Mode and –Type toggle of the Room-Manager

The Room-Manager has 2 separate inputs that can be used for Operation-mode and

Operation-type toggle. Any binary sensor or binary outputs of other intelligent devices can be
connected to that inputs.

For Room-Managers with a software version under V40 only the input for Operation-mode toggle

is available.

Operation mode and operation type:

With this input the operation mode and the operation type can be switched (only if the separate

input for operation type is not connected).

Summary of Contents for RF System 2.42





















































































































































































































































Search results

Summary of Contents for RF System 2.42

Reviews:

Related manuals for RF System 2.42

Brands by name

Popular brands

Eaton RF System 2.42, Manual

Search results

Summary of Contents for RF System 2.42

Reviews:

Related manuals for RF System 2.42

Brands by name

Popular brands