Eaton RF System 2.42, Manual

Page: 243 / 244

243 Eaton RF-System
© 2015 Eaton Electrical Group
The operating system simply informs you that the driver is not digitally signed. Please select the
option “Install this driver software anyway“.
This message will only occur if you run the software update for the very first time.
Driver search by Windows Update:
Right after the start of the Software update procedure the USB-RF-Stick will switch to a different
mode and reconnect to the PC.
The system will detect it as a new device and the installation of a special driver that has been
prepared by the MRF before will take place.
Depending on the configuration of your windows installation it may happen that Windows wants to
search for a driver automatically using the Windows update function before it allows the MRF to do
the driver installation.
If that is the case you will see the following icon in your windows menu bar on the right side right
after starting the software update.
The disadvantage of this function is that this may take some time or eventually be never completed
at all. Since the software update function is already running and the MRF is waiting for the
installation of the driver it will cancel the software update automatically if this takes too long.
We recommend to skip the automatic driver search using windows update.
Double click on the symbol in the menu bar. In the following window select the option „Skip
obtaining driver software from Windows Update“.