Eaton RF System 2.42, Manual

Page: 8 / 244

8 Eaton RF-System - Help
© 2015 Eaton Electrical Group
Contains the USB-RF-Communication-Stick Software USB V1.04 - RF V1.08, the actual
file and Changelog can be found in the Subfolder „Device Software“ in the Eaton RF-System main
folder
Contains the USB-RF-Configuration-Stick Software USB V1.01 - RF V 1.00, the actual file
and Changelog can be found in the Subfolder „Device Software“ in the Eaton RF-System main
folder
New display option Status-Connections , Shows which actuators will send the old status
message or the new extended status message to intelligent devices and offers details about the
connection path. Additionally you can now choose for every actuator in the project if it should send
the old status message or not independent of the reception quality
Contains the Display Remote Control Software V8d, the actual file and Changelog can be
found in the Subfolder „Device Software“ in the Eaton RF-System main folder
Display of Hardware Version of all devices in „ Detailed info of all devices “ and „ Overview
project configuration “
The RF-monitor now gives more detailed information on received telegrams
Insert virtual devices will now insert Energy measurement sensors with the right basic
settings
The offset temperature for Room 1 in the Room-Manager will now always be saved
correctly
Creation of manual routing connections is now realized for all devices (Energy
measurement sensor, RF Radiator thermostat etc. missing before)
It is no longer possible to use datapoints of intelligent devices as outputs in the connection
wizard if they are already used as inputs
Changes in mains supplied sensors will now always be tracked immediately and
completely loaded to the devices with the ‚Load changes‘ function
Switching actuator 10A/16A will be supported for testing purpose, a new generation of
switching actuators with several new features and additional functions (expected release date Q1
2014)
New Router will be supported for testing purpose, a new generation of Routers (standard
and with Logic function – expected release date Q1 2014)
Function Barcode-Scan will be supported for testing purpose, a new function that can be
used to insert new devices to the project by scanning a Barcode situated on the device (planned
realization of the Barcodes on the devices Q1 2014)
Support of the Ethernet CI, USB-RF-Communication-Stick and Smart Home Controller
RF-Software Version 2.x for testing purpose, these versions are necessary to fully support the
extended Status message of the new Switching actuator generation
What’s new for 2.19?:
Added option to display the IP-address of a Smart Home Controller ; executed by right click
on the device and selecting 'IP-address'
What’s new for 2.18?:
Smart Home Controller is supported, a new control and communication device that can be
accessed via Smartphone or Tablet (Device release date is planned for Q1 2013)