94
Eaton RF-System - Help
© 2015 Eaton Electrical Group
Shading and the Room Manager
You can define up to 3 groups for shading (independent if single or multiswitching of shutter
actuators).
Changing the name of the shadings can be done in the Room Manager directly or by the MRF
software.
By using the sensor wheel you can operate the Shadings (open, close, step up, step down).
For every shading you can define a timer in which you can set at what time the shading should be
opened or closed. Additionally the shading group can be controlled in dependence of an analogue
value (brightness), room temperature (room 1 to 6) or a binary value. Also a Hysteresis and a
minimum time can be defined for the “enabling”.
Please pay attention that the “enabling” function has only influence on the shading group if the
status of the timer is open! The “enabling” function has no influence if the status of the timer is
close.
Summary of Contents for RF System 2.42
