Eaton RF System 2.42, Manual

Page: 127 / 244

127 Eaton RF-System
© 2015 Eaton Electrical Group
Setting of Delay time for Channel A:
The Switch-Off delay time for channel A can be set to the following values:
If movement is detected the delay time begins to run and after this time the channel automatically
switches OFF. Now if new movement is detected in this time the delay time begins to run new.
So for example the light is at least ON for the defined delay time if no new movement is detected.
Setting of ambient light level:
Movement is only detected if the actual light value is within the set light level.
Setting of motion sensitivity:
The impulses specifies how often a movement has to be detected before the motion detector
reacts.