Eaton RF System 2.42, Manual

Page: 110 / 244

110 Eaton RF-System - Help
© 2015 Eaton Electrical Group
counter is the same as the Alltime value displayed at the Room Manager.
New since RM V38:
Generator/Consumer: It is possible to select if the input is connected to a generator or a
consumer.
The selection influence the texts which will be displayed on the Room-Manager or rather the text
which can be selected at “Display on the Room-Manager” and the calculation of the costs.
Show text or chart page on the Room-Manager – It is possible to display or to hide the text or the
chart page of this energy input.
Entering the counting constant:
Format of the counting constant: Select the format of the counting constant, i.e. either “Impulses /
Measuring unit” or “Measuring units / Impulse"
Value: Please enter the numerical value of the counting constant here.
Counting constant: Here you can check the counting constant resulting from your entries, it should
be equal to the counting constant at the connected counter.
Settings for costs:
Here you can do the settings for your cost calculation.
Currency: Enter the currency in which you wish to have the costs displayed.
Base cost value / Month: Please enter the monthly basic charge for the variable that was counted
Tariff per measuring unit: Please enter the tariff per measuring unit
CO2 per kWh: If you have selected kWh or Wh as a variable to be measured, you can enter the
CO2 factor per kWh here.
Threshold value surveillance:
Threshold value: Enter the threshold value here
kWh /: Select the time period that is kept under surveillance
In case of exceeding the value: Here you can set the action that should be carried out in case of
exceeding the threshold value.
Display alarm: If this option has been activated and if the threshold value has been exceeded, a
short info page will appear at the display of the Room Manager. This info page needs to be
acknowledged.
Display at the Room Manager:
In 3 double-lines you can have the different consumption values displayed. The settings made
here will be visualized at the display of the Room Manager, but they can be changed at any time
again via the Settings menu in the Room Manager.
Possible settings for the display (dependend if consumer or generator is selected):
Values: Energy consumption, Energy production, Costs, Gains, CO2 cunsumption, Consumption
prognosis, Production prognosis, Cost prognosis, Gain prognosis, CO2 prognosis
Time periods: Last hour, 24 hours, since mid-night, 7 days, since the beginning of the week, 30
days, since the beginning of the month, since the beginning of the year, total value, Alltime
Not every period of time can be selected for every value though.