80
Eaton RF-System - Help
© 2015 Eaton Electrical Group
For further information on the configuration of the Home Manager, please turn to the Help section
of the Eaton Manager RF program.
Analog actuator
General information:
The analog actuator (0-10V or 1-10V) can be used to control and switch different devices. It
provides a 0-10V or 1-10V (max. 20mA) control signal und its functions are similar to the dimming
actuator. With the additional relay loads can also be switched. By using the MRF configuration
window you can enable or disable the relay. It can be controlled by any sensor of the xComfort
product family.
has been established between a sensor and an actuator, the actuator
can be configured.
Right-click the analog actuator and select the item Settings in the
Then the configuration window should appear, which usually looks like that:
Summary of Contents for RF System 2.42
