Eaton RF System 2.42, Manual

Page: 15 / 244

15 Eaton RF-System
© 2015 Eaton Electrical Group
”Display reception quality of this device” -> shows the reception quality lines from this device to all
the other selected devices.
“Display reception quality for the selected group" -> shows the reception quality of all devices in the
selected group with respect to each other
“Display reception quality with respect to the group as a table” -> shows the reception quality for
this device with respect to the selected group in table form (perc device name).
“Re-Scans reception quality to the group” -> Re-scans the reception quality for this device to the
rest of the selected group.
“Re-Scans reception quality of the group” -> Re-scans the reception quality of the selected group
The functions described above mean, for example, that the reception quality of a new device to its
closest neighbours can be re-scanned very quickly without having to involve the entire system in
this procedure.
New for 1.55:
Configure group basic settings
Configure the group function
New with version 2.0:
"Assign topology" -> Select an area of the project topology to which you want to allocate the
selected devices
"Copy selected devices" -> Copies the selected devices to the clipboard as virtual devices
"Remove selected devices" -> Removes the selected devices from the project
"Load changes in selected devices" -> Loads configuration changes in the selected devices (if
there are changes)
"Load basic settings in selected devices" -> Loads basic settings in the selected devices (entire
configuration is deleted)
In addition, the screen position of multiple devices can also now be changed by selecting multiple
devices and using drag & drop.
Define password
You can define a password for the system under this menu item. Each device forming part of the
project, or which is to be scanned at a later date, will receive this password when loading
(password, changes or complete).
When you start a new project and click on “Scan”, this window also opens and you can define a
password even before scanning. This password cannot be loaded in the devices during scanning,
only when loading changes on completion of the scanning process.
A password is used to ensure that the system is protected from unauthorised access.
Also see Project-Settings and Project-Password
Load password
All devices forming part of the project which do not yet have the current password are loaded with
the defined password.