216
Eaton RF-System - Help
© 2015 Eaton Electrical Group
The blue line goes from the sensor to the group master (Switching actuator 7). That actuator
acknowledges, every other actuators are just members of the group.
Configure the group function
The function is used to configure a common group function from one sensor to many actuators in
one single step. The bigger the group is the more time I can save by using this function.
To be able to use this function one sensor and at least one actuator that has a connection to that
sensor has to be selected. For executing this function you have to right click the sensor and
choose the option ‘Configure the group function’ in the popup menu. If you selected a sensor with
more than one sensor channel you will be asked to choose the desired channel. After that the
configuration windows of the selected actuator types will pop up one after another so you can
configure the function for each actuator type individually.
Example:
Group function of several actuators of different type for RC-2-fold (left rocker) – OFF function:
Summary of Contents for RF System 2.42
