183
Eaton RF-System
© 2015 Eaton Electrical Group
The type with the binary input adds the additional functionality like one channel of the 230VAC
Binary input. The state of a mains powered switch or pushbutton is detected and depending on the
configuration used internally in the own actuator function and/or connected to other xComfort
devices.
The type with the Energy measurement function will additionally measure the active power and
record the Energy of the connected Load. These channels can be connected directly to an
intelligent device to monitor and manage the measured power and energy. The additional Load
Error Detection status can be used to signal a failure of the switched load based on a load beneath
the definable minimum consuming power.
Summary of Contents for RF System 2.42
