Eaton RF System 2.42, Manual

Page: 172 / 244

172 Eaton RF-System - Help
© 2015 Eaton Electrical Group
DP
(Datapoint
) Shows the Datapoint number of the interface the
connected device channel is handled over. This
column is optional and can be activated or
deactivated in 'Optional columns in connections
list'.
Direction Shows the connection direction of the connected
sensor channel (=> outbound from SHC, <=
inbound to SHC, =>> Group function outbound
from SHC, <=> in- and outbound connection).
This column is optional and can be activated or
deactivated in 'Optional columns in connections
list'.
Device
type Shows the device type of the connected device
channel. When adding markers or for connections
to/from undefined types (Explanation see
Creation
of Markers and Connections to generic Device
channels ) the type can be changed. This column
is optional and can be activated or deactivated in
'Optional columns in connections list'.
Name in
MRF Shows the name of the connected device
channel. For a group function all names of the
connected group members will be displayed. This
column is optional and can be activated or
deactivated in 'Optional columns in connections
list'.
Name in
SHC Shows the name of the connected device channel
how it will be displayed later in the Smart Home
Controller. This name can be freely edited (max.
40 characters).
Function Defines the function of the connected device
channel if not already determined by its type. (see
Functions of device channels ).
Extra
setting 1 -
3 Depending on the type of the connected device
channel several extra options can be defined
(see
Extra settings for devices )
assigned
Zone(s) Lists all Zones a device channel is assigned to
(unlimited number of assignments for each device
channel)
By left clicking on a column title the content will be sorted upwards or downwards.
If the option 'Only show connections of the selected zone' is activated only connections are shown
in the connection list that are assigned to the actual selected zone.
Functions of device channels:
Depending on the connected channel and the selected device type there are different functions
that define how a device channel is used in the Smart Home Controller and for what Functions it
can be used. For many devices there is a fixed function (e.g. Radiator Thermostat, Heating input
MCH, Room Controller,...) where no special device function needs to be defined. All other device
types that are able to have several different functions will be mentioned in the following list.
Function
name
Selection for
device
channel
Explanation