195
Eaton RF-System
© 2015 Eaton Electrical Group
sending of the new status message of each new actuator will be delayed differently in order to
have a reliable reception of the status without telegram collisions or losses. Therefor it can take
while for bigger groups that the status of all actuators will be sent to the intelligent device (aound 1
minute for a group of 60 devices)
Configuration examples
Configuration example Switching actuator
Configuration example Dimming actuator
Configuration example shutter actuator
Configuration example Room controller
Configuration Example of the Switching Actuator
1. Right-click the switching actuator and select Settings in the Drop Down Menu
2. The configuration window of the switching actuator opens.
In the left box, where you can select the assigned sensors, left-click the sensor (in our case the
hand-held transmitter) whose assignment you wish to configure.
Summary of Contents for RF System 2.42
