215
Eaton RF-System
© 2015 Eaton Electrical Group
As you can the command from 1-fold pushbutton to Switching actuator 3 is routed by Switching
actuator 1 and switching actuator 2.
What is a group function?
If the same sensor is connected to more than one actuator we talk about a group function
procedure.
Based on the scanned reception quality a master of the switched group of actuators is determined.
The master has the assignment to acknowledge the command to the sensor. Every other group
member does not acknowledge the command, however they only know that they are part of the
group and repeats the command of the sensor identically. We call this behaviour “resend”. Now
not every member does this resend really. As a result of the reception quality of every group
member to each other the program decides which actuators should make a resend and which not.
So it is ensured that every member understands the command and executes it reliable.
Members of group function has to understand at least 1 other member of the group to take part in
a group function.
Display in MRF:
By clicking right on a connection of a group function and “Show routing” you can see the following:
Summary of Contents for RF System 2.42
