Eaton RF System 2.42, Manual

Page: 232 / 244

232 Eaton RF-System - Help
© 2015 Eaton Electrical Group
Delete: Removes the device from the configuration and deletes it from the screen
Load default settings: Loads the component with its default settings
Delete password: Deletes the system password in the device (if there is any such password)
Re-scan the device: Re-scans the device (modifications not yet loaded will be overwritten)
Reception quality: Displays the inter-device Reception Quality as lines.
Connections: Displays the inter-device Connections
New in the professional version: Get reception quality new, investigates the reception quality for
this device new
New for 1.40:
Reception quality…:
The reception quality of this device can now be displayed with respect to all the other devices in
the system in table form by means of the device
’ s drop-down menu.
This table displays the reception quality as a % and the name of the other devices.
Allocation list…:
A list of all the connections or all the devices with which a particular device is communicating can
be displayed by means of the device
’
s drop-down menu under the option “Allocation list…”.
For mains-powered devices:
Sensor – specifies all the allocated sensors and what role the device plays in this connection
(group member, group master, resender)
Routing – specifies all the routing paths which run via this device (sender, destination, next device)