Eaton RF System 2.42, Manual

Page: 54 / 244

54 Eaton RF-System - Help
© 2015 Eaton Electrical Group
Right clicking on a new status connection will offer the possibility to show the connection path like
for any other connection
In this example the Status of ‚SA New 1‘ will be routed over ‚SA New 2‘ to the intelligent device.
Reception quality for all devices
Shows the inter-device reception quality.
The reception quality is depicted in coloured connection lines between the devices:
DARK-GREEN very good to good reception quality
LIGHT-GREEN good to medium reception quality
ORANGE medium to bad reception quality
GREY Bad to no reception quality
none no reception quality
Should you wish to see the reception quality of a particular device, you can display the reception
quality of this particular xComfort device by right-clicking and opening the
Drop Down Menu of this
device and by selecting the item Reception Quality.
NEW:
The ability to display inadequate reception quality is new. Reception quality lines which are shown
in grey are too poor to be transferred successfully to telegrams, but are important as information
for setting routers. In this case the reception quality is in a range which can just about be
understood by the other device. If you place a router between the devices with a grey reception
quality line, we can assume that a connection from the two devices to the router will work.