237
Eaton RF-System
© 2015 Eaton Electrical Group
Connection to - Configure devices at the same time:
By activating/deactivating this function, you can determine whether the function “Configure group
function” should be executed for the selection after clicking OK.
After completing the function, connections from selected sensor channels will be drawn to the
chosen actuators, and the Wizard will terminate.
The Connection Wizard can be run for a sensor channel as often as desired. It is not possible to
delete connections with it. Instead, connections will always be added with the additional selection
of actuators.
Device note
Option to enter a note for an individual device. The information will be saved in the MRF project,
but it will not be loaded in the device.
In Overview of System Configuration, the note will be displayed in its own column for each device.
The maximum length of the text is 255 characters.
Project settings and project password
Project settings:
The Project Settings window will be displayed before and, depending upon the scanned devices,
also after the scan process.
Before scan:
Here, diverse settings for the upcoming scan process can be activated.
Summary of Contents for RF System 2.42
