168
Eaton RF-System - Help
© 2015 Eaton Electrical Group
Save as file: The possibility to save the list as a file in the TXT- or the extended DPL-format. The
new DPL-format offers additional information about the Topology area of the connected devices as
well as the area names.
Download by RF: The list will be downloaded in the extended format to the external memory of
the USB-RF-Communication Stick for later use.
Details about the extended DPL-format can be found in the 3rd-party-documentaion.
Function of LEDs and Pushbutton:
The USB-RF-Communication Stick has 3 LED to indicate different states and one pushbutton..
Green LED: Active if the device is supplied. If a USB-Command is sent the LED will switch OFF
briefly.
Red LED: Is normally inactive. When making connections in the basic mode the LED has the
same functionality as a LED of an actuator. When the device is resetted using the pushbutton it will
blink as described in the mounting instruction of the device.
Orange LED: Briefly active when a RF-command is sent or received
Pushbutton: With the pushbutton you can completely reset the device. The sequence is identical
like deleting an actuator in basic mode.
Also see
Software Update of USB-RF-Sticks
Smart Home Controller
Configuration of the SHC after the Update
Smart Home Controller - Interfaces
Smart Home Controller - Devices & Zones
Smart Home Controller - General
The Smart Home Controller serves as a central control & communication unit. It can send
commands to all actuators and receive commands from all sensors, which it then processes
internally. It does not have an own display, therefore it needs for operation and visualization one of
the following devices:
Summary of Contents for RF System 2.42
