36
Eaton RF-System - Help
© 2015 Eaton Electrical Group
Recalculate Resenders of old Status connections:
With this function you can recalculate resenders of old status connections that cannot be sent
directly from an actuator to an intelligent device. All actuators of the new generation (actual
Switching actuator 10A/16A and Router from SW-Version 11) will support this function. Without
such devices the function cannot be used.
Depending on the result of the calculation the user will be informed whether resenders have been
found for all status connections or not and for what status connections the result was negative.
The user has then the possibility to deactivate the sending of the old status for these connections.
This calculation will also be executed when using the function „Recalculate all connections“
If you select Status-Details from a connection to an intelligent device you will see like in this case
that the old status will be resended by ‚SA New‘.
Summary of Contents for RF System 2.42
