Digital Equipment DEC 3000 600 AXP, Service Information

Page: 347 / 461

SET Command Parameters
DIAG_LOE
The DIAG_LOE parameter allows a diagnostic to loop on
an error (non-TURBOchannel devices only). All output is
suppressed. To exit the diagnostic error loop, press the Halt
button to return to the diagnostic environment (either console or
service mode).
This feature is available on loadable diagnostics only.
Format To execute the DIAG_LOE parameter, enter the following:
>>> SET DIAG_LOE {qualifier}
Return
Qualifier Select one of the following qualifiers when setting the DIAG_
LOE parameter.
Qualifier
1
Description
1 ON Enables loop on error feature
0 OFF Disables loop on error feature
1
The qualifier can take the form of either a number or the actual qualifier name.
Example The next example sets the loop on error feature.
>>>SET DIAG_LOE ON
Return
Result:
DIAG_LOE = ON
>>>
The next example also sets the loop on error feature.
>>>SET DIAG_LOE 0
Return
Result:
DIAG_LOE = OFF
>>>
13–26