Digital Equipment DEC 3000 600 AXP, Service Information

Page: 454 / 461

Commands, console (cont’d)
SET SCSI_A, 13–36
SET SCSI_B, 13–36
SET SECURE, 13–34
SET TRIGGER, 13–39
SHOW, 13–39
SHOW AUTO_ACTION, 13–41
SHOW BOOTDEF_DEV, 13–41
SHOW BOOT_OSFLAGS, 13–42
SHOW BOOT_RESET, 13–42
SHOW CONFIG, 13–43
SHOW DEVICE, 13–45
SHOW DIAG_QUICK, 13–46
SHOW DIAG_SECTION, 13–46
SHOW ENABLE_AUDIT, 13–47
SHOW ERROR, 13–48
SHOW ETHERNET, 13–48
SHOW LANGUAGE, 13–49
SHOW MEMORY, 13–49
SHOW MOP, 13–50
SHOW RADIX, 13–52
SHOW SCSI_A, 13–53
SHOW SCSI_B, 13–53
SHOW SECURE, 13–51
SHOW TRIGGER, 13–55
START, 13–55
TEST, 13–56
Communications port, 6–10
Components
System, 1–2
Configuration, 2–1, 7–1
commands, 7–2
disk, 7–11
memory, 7–13
rules, 7–15
rules, 7–2
storage devices, 7–8
Connectors
front, 6–5
rear, 6–8
Console
error messages, 14–8
halt messages, 14–9
LED codes, 10–10, 14–6
Console commands, 13–1
BOOT, 13–2
CONTINUE, 13–5
DEPOSIT, 13–6
EXAMINE, 13–10
HALT, 13–15
HELP, 13–15
INITIALIZE, 13–17
list, 13–1
LOGIN, 13–18
REPEAT, 13–19
SET, 13–20
SET AUTO_ACTION, 13–21
SET BOOTDEF_DEV, 13–23
SET BOOT_OSFLAGS, 13–24
SET BOOT_RESET, 13–25
SET DIAG_QUICK, 13–27
SET DIAG_SECTION, 13–27
SET ENABLE_AUDIT, 13–28
SET ETHERNET, 13–29
SET LANGUAGE, 13–31
SET MOP, 13–32
SET PASSWORD, 13–33
SET RADIX, 13–35
SET SCSI_A, 13–36
SET SCSI_B, 13–36
SET SECURE, 13–34
SET TRIGGER, 13–39
SHOW, 13–39
SHOW AUTO_ACTION, 13–41
SHOW BOOTDEF_DEV, 13–41
SHOW BOOT_OSFLAGS, 13–42
SHOW BOOT_RESET, 13–42
SHOW CONFIG, 13–43
SHOW DEVICE, 13–45
SHOW DIAG_QUICK, 13–46
SHOW DIAG_SECTION, 13–46
SHOW ENABLE_AUDIT, 13–47
SHOW ERROR, 13–48
SHOW ETHERNET, 13–48
SHOW LANGUAGE, 13–49
SHOW MEMORY, 13–49
SHOW MOP, 13–50
SHOW RADIX, 13–52
SHOW SCSI_A, 13–53
Index–2