Digital Equipment DEC 3000 600 AXP, Service Information

Page: 408 / 461

SCC Diagnostic Status/Error Messages
Message Meaning
? T-ERR-SCC-INTR - Not set in
TCASIC
COREIO interrupt is not set at the
TURBOchannel ASIC.
? T-ERR-SCC-INTR - Not set at CPU Message is not set at the DECchip 21064 CPU.
? T-ERR-SCC - TNF - %s
Message is printed out when the user requests a
test that does not exist. The test name the user
enters is placed where the %s is placed.
SCSI Diagnostic Status/Error Messages
SCSI Status
Messages
The following are the SCSI diagnostic status messages:
T-STS-SCSI (bus) - SCSI ASIC Register test
T-STS-SCSI (bus) - SCSI Ctrl Register test
T-STS-SCSI (bus) - Interrupt test
T-STS-SCSI (bus) - Data Transfer test
T-STS-SCSI (bus) - Map Error test
T-STS-SCSI (bus) - Minimal Device test
SCSI Error
Messages
The following is a list of the SCSI diagnostic error messages.
Note
The following error messages could indicate an I/O
module failure. Before replacing the module, try
reseating the module.
? T-ERR-SCSI - NVR err
? T-ERR-SCSI (bus) - DMA map err
? T-ERR-SCSI (bus) - SCSI ASIC Reg test - Data miscompare
T-ERR-SCSI (bus) - Addr = (address) Exp = (exp data)
Act = (actual data)
? T-ERR-SCSI (bus) - SCSI Ctrl Reg test - Data miscompare
T-ERR-SCSI (bus) - Addr = (address) Exp = (exp data)
Act = (actual data)
14–25