Digital Equipment DEC 3000 600 AXP, Service Information

Page: 350 / 461

SET Command Parameters
Qualifier
Select one of the following qualifiers to set the boot audit trail:
Qualifier
1
Description
1 ON Enables boot audit trail
0 OFF Disables boot audit trail
1
The qualifier can take on the form of either a number or the actual qualifier
name.
Example The next example enables the boot audit trail.
>>> SET ENABLE_AUDIT 1
Return
Result:
ENABLE_AUDIT = ON
>>>
ETHERNET The ETHERNET parameter sets the Ethernet port to either
Thickwire or twisted pair.
Format To execute the SET ETHERNET command, enter the following:
>>> SET ETHERNET {qualifier}
Return
Qualifier Select one of the following qualifiers to set the Ethernet port:
Qualifier Description
THICK AUI Ethernet port (Thickwire)
TENBT 10BASE-T port (twisted pair)
Example The next example selects a Thickwire network.
>>> SET ETHERNET THICK
Return
Result:
ETHERNET = THICK
>>>
13–29