Digital Equipment DEC 3000 600 AXP, Service Information

Page: 59 / 461

System Cover
System Cover
Warning:
Power Supply Wait at least five minutes after turning off the system unit power
before you open the system unit. This gives the power supply
capacitors time to discharge safely.
Removing the
System Cover To remove the system cover, use the next procedure.
Step Action
Refer to
Figure 3–9
1 Shutdown the system. –
2 Power off the system. –
3 If the your system is mounted in a
floor stand, then remove the floor stand
using the BA47X–AA Vertical Floor
Stand procedures in the document. –
4 Disconnect all cables from the power
source and then from the rear of the
system. –
5 Loosen the captive screw by turning it
counterclockwise.
!
6 Slide the cover toward the front of the
system and lift the cover off.
"
3–14