Digital Equipment DEC 3000 600 AXP, Service Information

Page: 410 / 461

SCSI Diagnostic Status/Error Messages
Note
The following error messages could indicate a system
module failure. Before replacing the module, try
reseating the module.
? T-ERR-SCSI (bus) - Map Err test - ir notval not set
? T-ERR-SCSI (bus) - Map Err test - ir parerr not set
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
T-ERR-SCSI (bus) - virt data addr = (data addr)
map reg addr = (map reg adr)
T-ERR-SCSI (bus) - map reg data = (map data) IR = (ir) CIR = (cir)
? T-ERR-SCSI (bus) - Map Err test - DMA inq err
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
info = (informational value)
T-ERR-SCSI (bus) - actcmd = (actual command)
curcmd = (current command)
status = (status) int = (interrupt)
T-ERR-SCSI (bus) - IR = (ir) CIR = (cir) IME = (ime)
T-ERR-SCSI (bus) - snskey = (sense key) extfru = (extended fru info)
Note
The following error messages could indicate a SCSI
device or I/O module failure. Before replacing the device
or module, try reseating them.
? T-ERR-SCSI (bus) - Min Dev test - start unit
? T-ERR-SCSI (bus) - Min Dev test - test unit ready
? T-ERR-SCSI (bus) - Min Dev test - rewind
? T-ERR-SCSI (bus) - Min Dev test - mode select
? T-ERR-SCSI (bus) - Min Dev test - read
? T-ERR-SCSI (bus) - Min Dev test - send diagnostic
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
info = (informational value)
T-ERR-SCSI (bus) - actcmd = (actual command)
curcmd = (current command)
status = (status) int = (interrupt)
T-ERR-SCSI (bus) - IR = (ir) CIR = (cir) IME = (ime)
T-ERR-SCSI (bus) - snskey = (sense key) extfru = (extended fru info)
? T-ERR-SCSI (bus) - Min Dev test - wrong num bytes
? T-ERR-SCSI (bus) - Min Dev test - data miscompare
T-ERR-SCSI (bus) - id = (device id) lun (logical unit number)
14–27