Digital Equipment DEC 3000 600 AXP, Service Information

Page: 358 / 461

SET Command Parameters
Example The next example sets the SCSI B host ID to 6.
>>> SET SCSI_B 6
Return
Result:
SCSI_B = 00000006
>>>
SCSI_RESET
The SCSI_RESET parameter causes a time delay after a SCSI
reset before booting.
• A value of 3 is recommended if a floppy or a hard disk is
being booted.
• A value of 4 is recommended for tape drives.
• A value of 6 is recommended for CDROMs.
The time delay is in seconds. The qualifier value is actually
the n in the
2
n
; therefore, the 3 for a floppy means 8 seconds
or
2 3
.
Format To execute the SET SCSI_RESET command, enter the following:
>>> SET SCSI_RESET {value}
Return
Value Select a value of 0 to 7 to set the SCSI_RESET parameter. The
qualifier value is actually the n in the
2
n
; therefore, the 3 for a
floppy means 8 seconds or
2 3
.
Example The next example sets a time delay of 4.
>>> SET SCSI_RESET 4
Return
Result:
SCSI_RESET = 4
>>>
13–37