Digital Equipment DEC 3000 600 AXP, Service Information

Page: 227 / 461

Entering and Exiting Console and Service Mode
2. Enter SET DIAG_SECTION 1 command while in service
mode.
3. Enter the SET AUTO_ACTION HALT command. See the
command description in Chapter 13.
Exiting Console
Mode
To exit console mode and enter program mode, enter one of the
following commands at the console prompt:
• BOOT
The BOOT command initiates a system bootstrap operation.
See Chapter 13.
• CONTINUE
The CONTINUE command clears the RC State Flag bit and
resumes processor execution. This command does not restart
the system if you have to shut it down. See Chapter 13.
To exit console mode and enter service mode, enter the following
command:
• SET DIAG_SECTION 2
See Chapter 13.
Entering
Service Mode Some diagnostics require that the system be in service mode. To
enter service mode, you must first enter console mode. At the
console prompt, enter the following command:
>>> SET DIAG_SECTION 2
Return
Exiting Service
Mode
To exit service mode and enter program mode, enter one of the
following console commands:
• BOOT
The BOOT command initiates a system bootstrap operation.
See Chapter 13.
• CONTINUE
The CONTINUE command clears the RC State Flag bit and
resumes processor execution. This command does not restart
the system if you have to shut it down. See Chapter 13.
9–7