Digital Equipment DEC 3000 600 AXP, Service Information

Page: 119 / 461

ISDN Diagnostic
TURBOchannel Testing
Caution Double-width TURBOchannel options should always be installed
in slots 0 and 1. Attempting to install a double-width option
into slot 2 could cause both permanent damage to the option and
intermittent operation. See Chapter 1 for further details.
MIPS Emulator
Overview
The MIPS emulator performs the following tasks on a
TURBOchannel option:
• Performs diagnostic testing on a TURBOchannel option
• Initializes a TURBOchannel option
• Displays configuration on a TURBOchannel option
• Runs the console on a TURBOchannel graphics option
• Boots the operating system using a TURBOchannel option
The device name for a TURBOchannel option is TC#.
TC = TURBOchannel option
# = TURBOchannel slot number
A TURBOchannel option located in slot 2 has a device name of
TC2.
Before You
Begin Before testing, perform the following:
Step Action Description
1 Enter console command See Entering Console Mode
2 Enter the following at the
console prompt:
>>> SHOW CONFIG Displays TURBOchannel device names.
Identifies and records TURBOchannel
device names that you want to test (for
example, TC2).
3 Enter the following at the
console prompt:
>>>T[EST] {device_name} ls Lists available TC scripts. If an asterisk
(*) is at the end of a script, then it is an
object script and will fail if selected.
4–31