Digital Equipment DEC 3000 600 AXP, Service Information

Page: 97 / 461

Running Single/Multiple Tests
The next example executes testing on a range of diagnostics
starting with the ASIC diagnostic and ending with the ISDN
diagnostic. When specifying a range, separate the device names
with a colon.
>>> T ASIC:ISDN
Return
The starting and ending diagnostic range is:
ASIC
MEM
NVR
SCC
NI
SCSI
ISDN
Note
When running diagnostics in the previous configuration,
those run in service mode require loopback connectors.
Otherwise, all of these tests can be run in console mode.
Diagnostics that run in console mode also run in service
mode.
The next example starts testing the SCC diagnostic, then the
ASIC diagnostic, and ending with the MEMORY diagnostic.
>>> T SCC,ASIC:MEM
Return
Running Tests
Continuously The console REPEAT command runs a diagnostic or a sequence
of diagnostics continuously. The REPEAT command executes
testing continuously until you enter
Ctrl C
at the console or
depress the Halt button, or until an error occurs.
Note
If you press the Halt button, this interrupts the running
test and returns to the console prompt.
4–9