Digital Equipment DEC 3000 600 AXP, Service Information

Page: 38 / 461

Console Security
Exiting the
Privileged State The following commands allow you to exit the privileged state:
• BOOT
• CONTINUE
• HALT
Disabling
Console
Security Use the next procedure to disable console security.
1. In console mode, set SECURE to zero (SET SECURE 0 or
SET SECURE OFF).
2. Move the secure jumper from the I/O module to the off
position.
Restoring
the Console
Password If you forget the console password and you need a new password
to gain access to the privileged state, then perform the following:
1. Set the secure jumper to the disabled position.
2. While in console mode, enter the following DEPOSIT
command:
>>> DEP -U -Q -N:1 1E0200088 0
Return
3. Move the jumper to the enabled (on) position.
4. Enter your new password.
>>> ENTER_NEW_PASSWORD
Return
2–6