Digital Equipment DEC 3000 600 AXP, Service Information

Page: 377 / 461

TEST
TEST
Description The TEST command executes selected diagnostic tests.
Format To execute the TEST command, enter the following:
>>> T[EST] {qualifier}
Return
Qualifier For a list of diagnostic tools see Chapter 4 (for Model 600/600S
AXP) or Chapter 9 (for Model 800/800S AXP).
Example The next example runs the ASIC diagnostic.
>>> T ASIC
Return
Alternate Consoles
Overview
The system provides an alternate console for server
configurations and in the event of a graphics subsystem failure.
Console commands may be entered on a terminal connected to
the printer port or from a network connection.
Printer Port
Console To access the printer port console, verify that the:
• Baud rate of the terminal connected to the alternate console
port is set at 9600 baud.
• The alternate console switch located on the rear of the unit
is in the up position when the system is using a graphics
console. When the switch is in the down position, the
alternate console port can be connected to the alternate
console.
13–56