Digital Equipment DEC 3000 600 AXP, Service Information

Page: 76 / 461

SIMMs
SIMMs
Note If you are replacing one SIMM, the new SIMM must be the same
memory size and speed as the remaining seven SIMMs located
on the same plane.
Precautions Anytime you replace a module in the DEC 3000 Model 600/600S
AXP system, antistatic precautions must be taken. Refer to the
section Antistatic Precautions.
Removing the
SIMMs Use the next procedure to remove a SIMM.
Step Action
Refer to
Figure 3–16
1 Remove the system drive shelf. See the
section Removing the Drive Shelf. –
2 Remove the memory mother board
(MMB) in which the SIMMs are
mounted by pulling straight up on
the tabs at the end of the MMB.
!
3–31