Digital Equipment DEC 3000 600 AXP, Service Information

Page: 98 / 461

Running Single/Multiple Tests
Format To execute the REPEAT command, enter the following:
>>> R[EPEAT] T[EST] {device name}, {device name}
Return
Example The next example shows that the memory diagnostic runs
continuously until you enter
Ctrl C
at the console.
>>> R T MEM
Return
The next example shows that the memory diagnostic and the
NVR diagnostic runs continuously until you enter
Ctrl C
at the
console.
>>> R T MEM,NVR
Return
Entering/Exiting Console and Service Mode
Entering
Console Mode You may enter console mode by performing one of the following.
Note
Perform a system shutdown before pushing the Halt
button.
• Depress the Halt button (this places you in console mode).
• Enter SET DIAG_SECTION 1 from service mode (this places
you in console mode).
• Enter console mode by default after power on is executed by
issuing one of the following SET commands while in console
mode:
– SET AUTO_ACTION HALT
– SET AUTO_ACTION 3
For more information, see Chapter 13.
4–10