Digital Equipment DEC 3000 600 AXP, Service Information

Page: 348 / 461

SET Command Parameters
DIAG_QUICK
The DIAG_QUICK parameter sets the diagnostic startup mode
to either normal or fast startup testing. When fast mode is
selected, all diagnostic tests on the base system are run. No
TURBOchannel options are tested unless they are graphics
options.
Format To execute the DIAG_QUICK command, enter the following:
>>> SET DIAG_QUICK {qualifier}
Return
Qualifier Select one of the following qualifiers to set the diagnostic startup
mode.
Qualifier
1
Description
1 ON Quick verify testing
0 OFF Normal testing
1
The qualifier can take the form of either a number or the actual qualifier name.
Example The next example sets the quick verify testing.
>>> SET DIAG_QUICK ON
Return
Result:
DIAG_QUICK = ON
>>>
The next example sets the normal testing.
>>> SET DIAG_QUICK 0
Return
Result:
DIAG_QUICK = OFF
>>>
DIAG_SECTION
The DIAG_SECTION parameter sets the diagnostic environment
in which the diagnostics can be run.
13–27