Digital Equipment DEC 3000 600 AXP, Service Information

Page: 366 / 461

SHOW Command Parameters
DEVICE
The DEVICE parameter displays SCSI and Ethernet device
information.
Format To execute the SHOW DEVICE command, enter the following:
>>> SHOW DEVICE
Return
Example The next example shows the current devices. See the following
table for further explanation of each column in this example.
>>> SHOW DEVICE
BOOTDEV ADDR DEVTYPE NUMBYTES RM/FX WP DEVNAM REV
------- ---- ------- -------- ----- -- ------ ---
ESA0 08-00-2B-1A-38-31 , THICK
..HostID.. A/7 INITR
..HostID.. B/7 INITR
>>>
Column Meaning
BOOTDEV Console boot name for the device
ADDR Either hardware address or SCSI ID
DEVTYPE Device type (RODISK is a read only disk)
NUMBYTES Drive capacity
RM/FX Indicates whether the drive has removable
or fixed media
WP Indicates whether the drive is write
protected
DEVNAM Device name for the drive
REV Firmware revision level for the drive
DIAG_LOE
The DIAG_LOE parameter displays whether the diagnostic loop
on error feature is selected.
Format To display the current DIAG_LOE parameter setting, enter the
following:
>>> SHOW DIAG_LOE
Return
13–45