Digital Equipment DEC 3000 600 AXP, Service Information

Page: 415 / 461

NI Diagnostic Status/Error Messages
Error Messages Note
The following messages may indicate a failing I/O
module. Before replacing the module, first verify that
the loopback connector is installed and try reseating the
module.
? T-ERR-NI - NVR err
? T-ERR-NI - DMA Init err
? T-ERR-NI - DMA Rx err
? T-ERR-NI - DMA Tx err
? T-ERR-NI - Init test - DMA err
T-ERR-NI - Err = (error code) CSR0 = (csr0)
T-ERR-NI - IR = (ir) dma_addr = (dma address)
? T-ERR-NI - Init err
? T-ERR-NI - Init test - Init err
? T-ERR-NI- Int test - Init err
T-ERR-NI - Err = (error code) CSR0 = (csr0)
iblk_addr = (init address)
T-ERR-NI - iblk_mode = (mode) ladrf0 = (filter0) ladrf1 = (filter1)
? T-ERR-NI - Tx err
? T-ERR-NI - Collision test - tx error
? T-ERR-NI - Tx Buff Err test - tx err
T-ERR-NI - Err = (error code) CSR0 = (csr0) tx_addr = (tx address)
T-ERR-NI - tx_desc1 = (tx data1) tx_desc2 = (tx data2)
? T-ERR-NI - Rx err
T-ERR-NI - Err = (error code) CSR0 = (csr0) rx_addr = (rx address)
T-ERR-NI - rx_desc1 = (rx data1) rx_desc2 = (rx data2)
? T-ERR-NI - Net Addr ROM test - group err
T-ERR-NI - Err = (error code) na_base = (base addr) na_data1 = (data1)
T-ERR-NI - na_data2 = (data2) cksum = (checksum)
? T-ERR-NI - Net Addr ROM test - test patt err
T-ERR-NI - Err = (error code) patt1 = (pattern1) patt2 = (pattern2)
? T-ERR-NI - LANCE Reg test - data miscompare
T-ERR-NI - Err = (error code) Addr = (address)
Exp = (exp data) Act = (actual data)
? T-ERR-NI - Int Lpbk and DMA test - Pkt err
? T-ERR-NI - Int test - Pkt err
? T-ERR-NI - CRC test - Pkt err
? T-ERR-NI - Addr Filter test - Pkt err
14–32