Digital Equipment DEC 3000 600 AXP, Service Information

Page: 96 / 461

Running Single/Multiple Tests
Example The next example executes all ASIC subtests.
When you select a diagnostic test, that test executes its complete
set of subtests.
>>> T ASIC
Return
Running
Diagnostic
Subtests To execute a diagnostic sub-test, enter the following:
>>> T[EST] {device name} {sub-test}
Return
Example The next example indicates that testing of the sub-test SGMAP
has been selected. ASIC testing is performed only on those areas
defined by the SGMAP subtests.
>>> T ASIC SGMAP
Return
Running
Multiple
Diagnostic
Tests Diagnostics may be linked together in different combinations
depending on your needs. Diagnostic tests are executed one
at a time in the order you specify on the command line. The
diagnostic selection chosen may require that:
• Service mode be selected
• Loopback connector be connected
The following are sample diagnostic combinations:
>>> T[EST] {device name}, {device name}...
Return
>>> T[EST {device name}:{device name}
Return
>>> T[EST] {device name}:{device name},{device name}...
Return
Examples The next example executes testing on MEM and NVR
diagnostics. You may add any combination of diagnostics,
but separate the device names with a comma.
>>> T MEM,NVR
Return
4–8