Rockler Adjustable Height Workstation, Assembly Instructions Manual

Page: 1 / 8

Adjustable Height Workstation
Assembly Instructions
Congratulations on the purchase of your new Adjustable
Height Workstation! It allows you to set the height of your
work surface anywhere between 26
1
⁄
2
" and 42", and its smooth,
easy-to-adjust hydraulic system can lift up to 500 lbs. Please
review these instructions thoroughly before beginning.
Notes for Unpacking and Operation
• Keep the Leg Assembly as it arrives in the box. Don’t push
the inner leg out to the point that the black bearing comes
out at the top; it is difficult to return.
• Be especially careful when handling the hydraulic
components (pump housing, tubing and brass pistons).
Do not drop the components or kink the tubing. Do not
attempt to adjust any fittings. The components form a
sealed system that requires no adjustment; any damage to
the system could prevent it from performing properly.
• The maximum recommended top size is 30" x 60".
• The tabletop should be centered on the table assembly,
and weight on the table should be evenly distributed to
prevent tipping and to ensure proper lift performance.
• The hydraulic mechanism has a load capacity of 500 lbs.;
it requires a load of at least 20 lbs. (including tabletop) for
even lowering.