4
Attach Pump Housing
to Table Arm Support
• Decide whether you want the lift mechanism to be on
the right or left side of the assembled table. Right-side
mounting is shown.
• Be especially careful when handling the Pump Housing
(4) and other hydraulic components. Do not bend or
kink the tubing, and do not drop the brass pistons.
Attach Table Arm Supports to Legs
• A helper will make this step easier.
• Hold on to the Feet (2) when flipping the assembly so
that the inner leg doesn’t drop out of the upper leg.
• You will need to cut the ties holding the hydraulic
tubing. Be especially careful not to cut or damage the
tubing itself.
• The brass piston with the shorter tubing should go into
the center of the Leg Assembly on which the Pump
Housing (4) will be located.
Pump Housing and Table Arm Support
PARTS LIST
Quantity
4
Pump Housing
1
5
Brass Piston
2
6
Table Arm Support
2
19
#10-32 x 1" Screw
12
20
#10-32 Nut
2
21
#10-32 x 2" BHCS
2
• Feed the hydraulic tubing toward the back of the Arm
Support.
• When attaching the Table Arm Support (6) to the Leg
Assembly (1), be careful not to drop the screws into the
Leg Assembly, and be sure the hydraulic tubing is not
kinked or pinched between the Table Arm Support (6)
and Leg Assembly.
21
20
21
19
20
20
21
4
6
